Eco-Series Basins have molded columns that transfer the weight of the statuary down to the ground below it. These columns can be filled with concrete creating pillars under heavy statuary.
Molded support grates have multiple legs for increased load capacity
- Ideal for use with concrete statuary, vases, rocks and fountains
- Available in four sizes – 28″, 40″, 48″ and 58″
- Four access doors (on 40″ and larger) allow for multiple pumps, auto-fill, underwater lights or can be used as plant pockets
- Roto-molded for superior strength
- PDF – Eco-Series Basin – Installation Instructions
|FB28E||28″ basin with molded stand||19 gallons|
|FBL40||40″ basin with bench grating||30 gallons|
|FBL48||48″ basin with bench grating||46 gallons|
|FB40E||40″ basin with molded stand||30 gallons|
|FB48E||48″ basin with molded stand||46 gallons|
|FB58E||58″ basin with molded stand||65 gallons|
EasyPro Pro-Series Fountain Basins: Roto-Molded for Superior Strength
Ships complete and is engineered to be self supporting, so no cement blocks or other props are needed to support the grating. The EasyPro Pro-Series Fountain Basins have the thickest, strongest grating of any similar product and features a pump access door for easy pump removal or service.
- Model: EFB26
- Measures 26″ x 26″ and is 12″ deep.
- Ideal for small statues, vases or rocks where splash is minimal
- Mag drive pumps from 120 GPH to 600 GPH are recommended
- 15 Gallon Capacity
- Rated for about (150) pounds without support, ie, cinder blocks or something similar installed in the basin to support the grating. With the basin’s grate supported, the load capacity is greatly increased.
- Model: EFB50
- Measuring 50″ x 50″ and 14″ deep
- Ideal for large individual features or can hold multiple smaller pieces for a truly impressive display.
- Pumps up to 3200 GPH can be used
- 80 Gallon Capacity
- Ships by Motor Freight
- Model: FWB48
- Ideal for use with wall block
- Can be installed on decks, patios, indoors – all above grade or buried
- Half circle design fits snug to wall
- Includes anti-splash strip – minimizes water loss
- Use WFS37 or WFS50 auto-fill valves to maintain water level
- Roto-molded, one piece design – super easy to install
- 1″ threaded outlet
- 48″L x 24″W x 15 1/2″H
- 35 Gallon Capacity